Machine Connections

FactoryWiz has one of the largest machine connection libraries in the industry. While most newer equipment utilize industry standard connections such as Fanuc Focus, MT Connect or OPC-UA, FactoryWiz also excels at hooking up to older equipment that was never designed to be monitored. 

Newer controllers with protocols which allow for the transfer of machine status data will be the easiest to install and give the most information, but we are accustomed to accommodating a wide range of capabilities even within the same site. Below is a chart to help you understand what information you can expect to get from FactoryWiz Monitoring for each of your machines.

OEE

[ninja_tables id=”282″]

Advance Features

[ninja_tables id=”299″]

Preventive Maintenance

[ninja_tables id=”315″]

OEE

[ninja_tables id=”2423″]

Advance Features

[ninja_tables id=”2421″]

Preventive Maintenance

[ninja_tables id=”2418″]

OEE

[ninja_tables id=”286″]

Advance Features

[ninja_tables id=”302″]

Preventive Maintenance

[ninja_tables id=”325″]

OEE

[ninja_tables id=”288″]

Advance Features

[ninja_tables id=”304″]

Preventive Maintenance

[ninja_tables id=”327″]

OEE

[ninja_tables id=”289″]

Advance Features

[ninja_tables id=”305″]

Preventive Maintenance

[ninja_tables id=”326″]

OEE

[ninja_tables id=”290″]

Advance Features

[ninja_tables id=”306″]

Preventive Maintenance

[ninja_tables id=”328″]

OEE

[ninja_tables id=”2430″]

Advance Features

[ninja_tables id=”2428″]

Preventive Maintenance

[ninja_tables id=”2426″]
  • ** = Number Only

OEE

[ninja_tables id=”291″]

Advance Features

[ninja_tables id=”307″]

Preventive Maintenance

[ninja_tables id=”330″]

OEE

[ninja_tables id=”292″]

Advance Features

[ninja_tables id=”308″]

Preventive Maintenance

[ninja_tables id=”329″]

OEE

[ninja_tables id=”293″]

Advance Features

[ninja_tables id=”309″]

Preventive Maintenance

[ninja_tables id=”331″]
  • *** = Next Generation Controller Only

OEE

[ninja_tables id=”2434″]

Advance Features

[ninja_tables id=”2433″]

Preventive Maintenance

[ninja_tables id=”2432″]

  • * = Tool Offset Only

OEE

[ninja_tables id=”294″]

Advance Features

[ninja_tables id=”311″]

Preventive Maintenance

[ninja_tables id=”332″]

OEE

[ninja_tables id=”295″]

Advance Features

[ninja_tables id=”310″]

Preventive Maintenance

[ninja_tables id=”333″]

  • Macro (M) = Commands embedded into your part program
Close